
Material Safety Data Sheet (MSDS)
Section 1: Product Information
Product Name:Zap-HybridomaTM
Product ID: 777ZAP033
Â
Section 2: Composition / Information on Ingredients
Substance Name:Zap-HybridomaTM
CAS Number:None
Composition: Proprietary Information
Â
Section 3: Hazards Identification
Potential Health Effects
Eye: May cause eye irritation. Symptoms include stinging, tearing, redness, and swelling of eyes.
Skin: Unlikely to cause skin irritation or injury.
Swallowing: Swallowing this material is not likely to be harmful.
Inhalation: Inhalation of vapors is not likely to be harmful.
Symptoms of Exposure: No data
Target Organ Effects: No data
Developmental Information: There is no data available for assess risk to the fetus from maternal exposure to this material
Cancer Information: There is no information available. The chance of this material causing cancer is unknown. This material is not listed as a carcinogen by the International Agency for Research on Cancer, the National Toxicology Program, or the Occupational Safety and Health Administration.
Other Health Effects: This material can form dust which may cause skin or mucous membrane irritation. Symptoms include redness, burning and swelling. Although they may cause respiratory tract irritation, nuisance dusts do not form scar tissue or affect the structure of air spaces in the lungs. Their effects on the tissues are potentially reversible.
Primary Route(s) of Entry: Inhalation, Skin contact, Eye contact
Â
Section 4: First Aid Measures
Oral Exposure: If swallowed, wash out mouth with water. If symptoms develop, seek medical attention.
Inhaled Exposure: If symptoms develop, move the individual away from exposure and into fresh air. If symptoms persist, seek medical attention. If breathing is difficult, administer oxygen. Keep person warm and quiet; seek medical attention.
Dermal Exposure: First aid is not normally required. However, it is recommended that exposed area by cleaned by washing with soap and water.
Eye Exposure: If Symptoms develop, immediately move individual away from exposure and into fresh air. Flush eyes gently with water for at least 15 minutes while holding eyelids apart; seek immediate medical attention.
Â
Section 5: Fire Fighting Measures
Autoignition temp: N/A
Flammability: N/A
Extinguishing Media: Non-combustible. Use extinguishing media appropriate to surrounding fire conditions.
Firefighting: For fires involving this material, do not enter any enclosed or confined fire space without proper protective equipment. This may include self-contained breathing apparatus to protect against the hazardous effects of the normal products of combustion or oxygen deficiency.
NFPA Rating: Health – 1, Flammability – 0, Reactivity – 0
Â
Section 6: Accidential Release Measures
Personal Precautions: Wear chemical safety goggles, rubber boots, and heavy rubber gloves.
Methods for Cleanup: Absorb on sand or vermiculite and place in closed containers for disposal.
Â
Section 7: Handling and Storage
There are no known problems with this material related to handling or storage at room temperature. Store in a cool dry place with container tightly closed. Store at 2 – 8 ºC.
Â
Use good personal hygiene practices. Wash hands before eating, drinking, smoking or using toilet facilities.
Â
Section 8: Exposure Controls / Personal Protection
Engineering Controls: Mechanical Exhaust required.
Personal Protective Equipment:
Other: Wear appropriate NIOSH/MSHA-approved respirator, chemical resistant gloves, chemical safety goggles, other protective clothing.
Â
Section 9: Physical / Chemical Properties
Appearance:
Physical State: Liquid
Â
Section 10: Stability and Reactivity
Stability: N/A
Hazardous Decomposition Products: Unknown
Hazardous Polymerization: Will not occur
Â
Section 11: Toxicological Information
The toxicological properties of this material have not been tested and identified. It is unlikely that there will be any toxicological problems with this material. However, appropriate precautions should be taken for a material with “unknown” toxicological properties.
Routes of Exposure: Harm caused by inhalation, ingestion, or skin absorption is undetermined.
Conditions Aggravated by Exposure: The toxicological properties have not been thoroughly investigated.
Â
Section 12: Ecological Information
No ecological data is available for this material.
Â
Section 13: Disposal Considerations
Observe all federal, state, and local environmental regulations.
Â
Section 14: Transport Information
DOT:
Proper shipping name: None.
Transport Hazard: This substance is considered to be non-hazardous for transport.
Â
Section 15: Regulatory Information
This material is experimental in nature. As such, it has not been classified by any of the regulatory agencies. Questions regarding this material should be directed to InVitria.
Phone: (800) 916-8311
Fax: (785) 238-5688
Address:
2718 Industrial Drive
Junction City, KS 66441
USA
Â
Section 16: Other Information
Disclaimer: For R&D use only. Not for drug, household, or other uses.
Warranty: The above information is believed to be correct but doesn’t purport to be all inclusive and shall be used only as a guide. Ventria Bioscience, Inc. shall not be held liable for any damage resulting from handling or from contact with the above product.
|